Products Page

Shopping Cart
Your shopping cart is empty.
Visit the shop

Welcome to the RAW Design products page. Choose a category from the list below and all available products will appear at the bottom of the page.

LoadingUpdating...
Raider
\"Reaper Tips\" for Yamaha Raider
"Reaper Tips" for Yamaha Raider

"REAPER Tips" are the DEATH of DOUBT.

Reaper Tips" release the "113 Cubic Inches of RAW Attitude" that Yamaha advertises. Now the SOUND of your Raider can match it's looks. There will be no DOUBT you have the baddest V-Twin on the street.

\"Reaper Tips\" for Yamaha RaiderMore Details
This is the best Bang-for-Buck you can get for your Raider.
The sound is a menacing yet quiet rumble when cruising, but it SCREAMS when you hit the throttle. 1-2 hours of installation time gets you the sound you want without the cost and headaches of a complete aftermarket exhaust. "Reaper Tips" need no reprograming of your Electronic Control Unit (ECU), do not effect the pollution control equipment and yet take advantage of the huge investment by Yamaha to develop a performance exhaust.

**Minor welding is necessary that can be done by a friend or any muffler shop.

Price: $185.00

Raider \"Stealth\" Front Turn Signals
Raider "Stealth" Front Turn Signals

These turn signals are engineered to be almost invisible until activated and eliminate the stock Lollipops for a supper-clean look.

Raider \"Stealth\" Front Turn SignalsMore Details
Made with billet aluminum and the brightest LED’s available, these small yet powerful units provide the visibility to help keep you seen while keeping a super-sleek appearance.

Price: $129.00

Raider \"Stealth\" Rear Turn Signals
Raider "Stealth" Rear Turn Signals

Clean up your Raider’s with our “Stealth Turn Signals.”

Raider \"Stealth\" Rear Turn SignalsMore Details
These turn signals are engineered to be almost invisible until activated and may eliminate the stock Lollipops for a supper-clean look. Made with billet aluminum and the brightest LED’s available, these small yet powerful units provide the visibility to help keep you seen while keeping a super-sleek appearance.

Price: $139.00

2 Position License Plate
2 Position License Plate

Horizontal or Vertical in 1 second with no tools required!!

2 Position License PlateMore Details
Now you can have either style with the same unit at any time you like. Just pivot the plate mount along it's center hinge point and it is held in place by super-strong magnets., show chrome plated.
Finish off with our chrome License Plate Trim with Light (sold separately)


Price: $200.00

 Raider, Front and Rear Stealth Signal package
Raider, Front and Rear Stealth Signal package

Save over Thirty dollars by purchasing these items as a package deal.

Price: $235.00

License Plate Mount with Lighted Frame
License Plate Mount with Lighted Frame

Under-Tail plate mount gives a finished look to your "De-beavered" Bike. Includes chrome trim with light. (Will fit only bikes with our Stealth, rear light kits)

License Plate Mount with Lighted FrameMore Details
Made from sheet aluminum, this simple mount will never rust or corrode and uses existing holes for mounting.
Included is a high quality chrome trim piece with built-in, high intensity LED lighting for plate illumination.


Price: $53.00

Raider, Forward Controls (Includes Hydra-Mount)
Raider, Forward Controls (Includes Hydra-Mount)

Now you can stretch out in style. Gain an adjustable 1"-4.5" stretch and look good doing it with these custom forward controls.

Raider, Forward Controls (Includes Hydra-Mount)More Details
Made from Billet Aluminum and available in Polished or Triple Plated, Show Chrome finish. Comes with all new linkages and hardware necessary to install. Includes our "Hydra-Mount" that allows almost infinite adjustability between 1"-4.5" stretch to fit almost anyone. Pegs are hinged. Matching passenger pegs available.


Price: $795.00

Streamline Tail Package 1
Streamline Tail Package 1

SAVE over 10 percent with this Package: Includes the Stealth Rear Turn Signals (amber lights in clear tube) , Rear License Plate Mount and Chromed License Plate Trim with LED Plate Light.

Streamline Tail Package 1More Details
Save over 20 dollars and streamline the tail or your RAIDER at the same time. This is everything you will need to "De-beaver" your bike in a couple hours and show off that big 210 rear tire.

Price: $170.00

Raider, \"Hydra-Mount\" Forward Control Extenders
Raider, "Hydra-Mount" Forward Control Extenders

Our New "Hydra-Mount" allows 5 different positions. From a 1" stretch to 4-1/2" to fit virtually anyone!

Raider, \"Hydra-Mount\" Forward Control ExtendersMore Details
The first of it's kind, the Hydra-Mount was designed with flexibility in mind. Both Heel and Toe pegs can be adjusted to almost infinite positions. It includes all hardware needed for mounting including shifter and brake rod extensions that cost extra in other kits. As a bonus, included is a mount between the extenders that allows placement of a Tool Pouch at the base of the Down Tubes. Hydra mount is made from billet aluminum and precision laser cut for an exact fit. Add all this together and it is a much better value than other kits that appear to cost less.

Pictures show stock position and 4-1/2" stretch. Note Tool pouch next to horn in stretched position. Bracket for pouch included in kit. You supply your own pouch.

Price: $195.00

Raider, Chrome Trim Pieces, SPECIAL Package Price
Raider, Chrome Trim Pieces, SPECIAL Package Price

This complete chrome kit gives your bike a finished look with only minutes of installation time. Get all 7 pieces and save almost 20 percent over individual pricing.

Raider, Chrome Trim Pieces, SPECIAL Package PriceMore Details
Made from P&O, HR steel and Triple Chrome Plated for a show finish. Each of these items takes only minutes to install. Install all in less than one hour.
Kit includes:
-Left side, Swing Arm Trim
-Right side, Swing Arm Trim
-Upper Belt Guard Cover
-Lower Belt Guard Cover
-Lower, Back, Sprocket Guard Trim
-Frame Cover
-Front Fork, Rock Guard Trim.

Price: $379.00

Raider, Chrome Trim, Frame
Raider, Chrome Trim, Frame

Made from P&O, HR steel and Triple Chrome Plated for a Show Finish. Installs with double-sided tape in 15-20 minutes.
(Each Side Sold Separately)


Price: $56.50

Raider, Chrome Trim, Upper Belt Cover
Raider, Chrome Trim, Upper Belt Cover

Made From P&O, HR Steel and Triple Chrome Plated for a Show Finish.

Raider, Chrome Trim, Upper Belt CoverMore Details
Trim fits over stock belt cover with double-sided tape. 10 minute installation time.

Price: $97.95

Raider, Chrome Trim, Lower Sprocket Guard
Raider, Chrome Trim, Lower Sprocket Guard

Made From P&O, HR steel and Triple Chrome Plated For a Show Finish.

Raider, Chrome Trim, Lower Sprocket GuardMore Details
Installs with Double-Sided Tape and 1 bolt. 15 minute installation time.

Price: $51.75

Raider, Chrome Trim, Swing Arm Trim
Raider, Chrome Trim, Swing Arm Trim

Made From P&O, HR Steel and Triple Chrome Plated for a Show Finish. Includes both Left & Right sides

Raider, Chrome Trim, Swing Arm TrimMore Details
Installs with Double sided tape in 10 minutes

Price: $84.00

Raider, Chrome Trim, Lower Belt Guard
Raider, Chrome Trim, Lower Belt Guard

Made from P&O, HR steel and Triple Chrome Plated for a Show Finish.

Raider, Chrome Trim, Lower Belt GuardMore Details
Installs with Double-Sided Tape in 10 minutes.

Price: $92.00

Matching Passenger Pegs
Matching Passenger Pegs

The same design as Forward Controls, completes the look.


Price: $115.00

Raider, Passenger Pegs
Raider, Passenger Pegs

Same design as our forward controls.

Price: $115.00

Raider, Chrome Trim, Front Fork Rock Guards
Raider, Chrome Trim, Front Fork Rock Guards

Made from P&O, HR Steel and Triple Chrome Plated for a Show Finish.

Raider, Chrome Trim, Front Fork Rock GuardsMore Details
Installs with Double-Sided Tape in 5 minutes.

Price: $53.00

\"BullitZ\" Signal lights
"BullitZ" Signal lights

RAW Design "BullitZ" lights will fit almost any bike with a straight 7/16" mounting hole. The angled mount offers several "looks" for both the Front and Rear signals while improving side lighting for higher visibility in traffic.

\"BullitZ\" Signal lightsMore Details
Made from Aircraft Grade Aluminum and Show-Chrome plated for a brilliant finish. Note: M109R-2 requires modification of headlight bezel.

Price: $235.00

Raider Fork Cap Covers
Raider Fork Cap Covers

Machined from Aircraft quality Billet Aluminum and Triple Show Chrome Plated. Less than 5 minute install. Price is per 3 pieces. (2 for fork tubes, 1 for tree mount) Tree mount cover available individually.


Price: $93.00

Black Magic Remote Controller
Black Magic Remote Controller

Street Magic™ Black Magic™ Wireless Remote with Built in Strobe, Breathe & Fader
Includes 2 Keychain Remote Control Units, Built in Fuse, and Quick Connectors

Black Magic Remote ControllerMore Details
This unit has it all, a built in strobe, fader and a new breathe function, all with just a push of a button!

This units compact design allows it to be used on bikes no other remote unit alone could fit in.

This unit will allow you to control your LEDs from up to 100 feet away!

Example of Functions:

1) Breathe - The remote control slowly decreases the LEDs from full brightness down to dim then slowly increases the LED intensity back to full brightness and then repeats. With this function the LEDs will appear to be "breathing"

2) Strobe - By far the wildest strobe patterns on the market. This remote control has 3 different strobe patterns that will definitely make your bike stand out.

3) Fade - Select one of four different intensity modes: 25%, 50%, 75%, 100% of full brightness.

4) On/Off - simply turn your LEDs on and off up to 100ft away.

Unit hooks up with 4 simple wires and comes with step by step instructions including everything needed to install your Street Magic™ Black Magic™ unit to your bike. Works with any 3 amp draw or less 12 volt accessory you want to control.

Price: $89.95

HYDRA-FLEX, GOLD SERIES, FLEXIBLE LEDs
HYDRA-FLEX, GOLD SERIES, FLEXIBLE LEDs

Super bright, Super Flexible, Totally Waterproof and smallest profile LED's available!!

These LED strips are the best available for accent lighting. At less than 1/16 inch thick, they can fit in places and be more flexible than any other LED's. Total encasement in solid neoprene make them completely waterproof.



HYDRA-FLEX, GOLD SERIES, FLEXIBLE LEDsMore Details
Each strip contains 24 LED's and can be cut into eight segments with 3 LED's each.


Price: $32.00

Yamaha Raider Front Stealth Signal Light Installation Instructions
Yamaha Raider Front Stealth Signal Light Installation Instructions

www.datafilehost.com/download-11452885.html

Price: $0.00

Yamaha Raider Rear Stealth Signal Lights Installation Instructions
Yamaha Raider Rear Stealth Signal Lights Installation Instructions

www.datafilehost.com/download-c52e2ca9.html

Price: $0.00

Yamaha Raider Hydra Mount Installation Instructions
Yamaha Raider Hydra Mount Installation Instructions

www.datafilehost.com/download-7a64cd7e.html

Price: $0.00

anjela
Close
E-mail It